Technique – Pagina 2 – One-Stop High Voltage Test Equipment Manufacturer & Supplier

What is a battery discharge tester used for?

A battery discharge tester is an electronic load device used to measure the true capacity of backup batteries. It pulls a constant current from the battery until a cutoff voltage. This test finds dead cells and proves the battery can support your critical systems during a real power outage.

Prove del fattore tan delta sui trasformatori: principi, collegamenti, analisi dei risultati e soluzioni sul campo

This article explains the measurement principle, GST/UST/GSTg connections, field-testing procedures, abnormal-result troubleshooting and practical solutions for different transformer-testing environments.

What is the test for transformer bushings?

You test transformer bushings to find deadly moisture and stop explosions. Use the right C1 and C2 connections, read the spikes correctly, and always replace failing parts immediately.

Cos’è la “Lista di controllo definitiva per la manutenzione degli interruttori HV in SF6 e per i test del punto di rugiada”?

Maintaining high-voltage circuit breakers requires more than just mechanical checks; rigorous SF6 gas analysis is critical. A standardized maintenance checklist focusing on dew point testing, leak detection, and purity analysis ensures compliance with IEC 60480 standards.

Che cos’è un misuratore del punto di rugiada dell’SF6 e perché è necessario?

Effectively managing SF6 moisture is non-negotiable for the safety and longevity of gas-insulated switchgear. An SF6 dew point meter serves as a critical early warning system, accurately measuring trace moisture to prevent the formation of highly toxic acids during arcing.