Açıklama
Genel Bilgiler
Transformer on-load switch tester is a test equipment for testing the on-load tap changer of action sequence and switching time. Transformer On-load Tap Changer Tester is mainly applied to measure the transient waveform, transient time, transient resistance value, three-phase synchronization of transformer on-load tap-changers.
Özellik
- Test transformers of type Y0, Y, and △, and display resistance values directly.
- Automatically analyze waveform faults and mark the faults.
- Automatically adjust resistance values and time ranges based on sampling data.
- Display synchronization status of three phases for transformer type △.
- Test with or without winding.
- Support four-terminal connection mode for high-accuracy resistance measurement.
- Enable continuous testing to save power-off time.
- Generate word reports.
- Equipped with an 800×480 colorized LCD with touch screen and a high-speed printer.
- Store up to 1000 groups of data and allow saving to USB flash disk.
Teknik Özellikler
- Three phase constant current source charge,charge current: 3A/1A; 0.6A/0.2A
- Maximum voltage of the port: 24V
- Maximum range of transition resistance: 100Ω
- Measuring range: 1A：4Ω～20Ω 0.2A：10Ω～100Ω
- Record time of waveform:300ms
- Sample rate: 30k
- Resolution of time:0.1ms
- Resolution of resistance: 0.1Ω
- Accuracy of transition resistance: ±5% Reading±0.1Ω
- Accuracy of transient time: ±0.5% Reading±0.2mS
- Temperature: -10-40℃ Humidity: <85%RH
English 
ไทย 
Tiếng Việt 
العربية 
Русский 
Italiano 
Español 
한국어 
Português do Brasil 
Français 
Español de México 
Português 
Türkçe 
Čeština 
Español de Argentina 
Slovenčina 
Dansk 
Polski 
Deutsch 
Ελληνικά 
O‘zbekcha 
Bahasa Indonesia 
Română