ผลิตภัณฑ์

วิธีการทำงานกับเรา?

เพื่อเริ่มต้นใช้งาน โปรดระบุรายละเอียดความต้องการของคุณ วิศวกรฝ่ายขายมืออาชีพของเราพร้อมให้บริการตลอด 24 ชั่วโมงทุกวันเพื่อช่วยเหลือคุณหากมีคำถามใดๆ ติดต่อเราได้ทางอีเมล โทรศัพท์ หรือมาพบเราด้วยตนเอง

คำถามที่พบบ่อย

เราเป็นผู้ผลิตอุปกรณ์ทดสอบมืออาชีพซึ่งมีทีม R&D โรงงานผลิต ระบบควบคุมคุณภาพ และฝ่ายการตลาดของเราเอง

เรามีการรับประกัน 12 เดือนและการบำรุงรักษาตลอดอายุการใช้งาน การรับประกันนี้ครอบคลุมถึงผู้ซื้อเดิมว่าอุปกรณ์จะปราศจากข้อบกพร่องใดๆ ในด้านวัสดุหรือฝีมือการผลิตเป็นระยะเวลาหนึ่งปีนับจากวันที่ซื้อ การรับประกันนี้ครอบคลุมเฉพาะข้อบกพร่องที่เกิดจากการใช้งานตามปกติและการบำรุงรักษาตามปกติเท่านั้น ไม่รวมข้อบกพร่องและความเสียหายใดๆ ที่เกิดจากการใช้งานผิดวิธี การดัดแปลง การติดตั้งที่ไม่เหมาะสม การละเลย หรือสภาพแวดล้อมที่ไม่เอื้ออำนวย ไม่ใช่ปัญหาด้านคุณภาพ

โดยปกติแล้ว ระยะเวลาจัดส่งจะอยู่ที่ประมาณ 15 วันทำการหลังจากชำระเงิน สำหรับสินค้าสั่งทำพิเศษบางรายการ อาจใช้เวลา 15-30 วันทำการ ขึ้นอยู่กับพารามิเตอร์ทางเทคนิคของข้อกำหนดของลูกค้า

ติดต่อเรา

อีเมล: info@kvhipot.com
โทร: +86 18062060691
วอทส์แอป: +8618062060691

หรือ

เครื่องทดสอบการเสียรูปของขดลวดหม้อแปลง KVRB

Power transformer winding deformation tester uses the internal fault frequency response analysis (FRA) method to measure the internal fault of transformer windings based on a measurement of the characteristics of transformer internal windings.

รายละเอียดสินค้า

คำอธิบาย

General Information

Power transformer winding deformation tester uses the internal fault frequency response analysis (FRA) method to measure the internal fault of transformer windings based on a measurement of the characteristics of transformer internal windings. This method can accurately identify transformer internal faults.

 

Main คุณสมบัติ

  1. Adoptshigh-speed, highly integrated microprocessor.
    Communication USB interface used between a laptop and instrument.
    3. Wireless WIFI interface (optional) used between the laptop computer and instrument.
  2. Hardware adopts dedicated DDS digital high-speed scanning technology (USA), which can accurately diagnose the faults like winding distorted, bulged, shift, tilt, inter-turn short-circuit deformation and inter-phase contact short-circuit.
    5. High-speed dual-channel 16-bit A/D sampling (in field test, move tap changer, and the wave curve shows obvious change) .
    6. Signal output amplitude is adjusted by software, and the peak value of amplitude is ± 10V.
    7. The computer will automatically analyze the test results and generate electronic documents (Word)
  3. The instrument has dual measurement features: linear frequency scanning measurement and segment frequency scanning measurement, compatible with measurement mode of two technical groups in China
  4. The amplitude-frequency characteristics are in line with the national technical specifications on amplitude-frequency characteristics tester. X-coordinate (frequency) has linear indexing and logarithmic indexing, so you can print out the curve with linear indexing and logarithmic indexing. The user can choose either according to actual needs.
    10. Automatic test data analysis system,
    Compare between A, B, C -phases in winding similarity comparison, and
    the analysis results are:
    ① excellent consistency
    ② good consistency
    ③ poor consistency
    ④ rather poor consistency

Compare winding deformation by calling the original data and comparing it with the current data of the same phase, namely A-A, B-B, C-C, and the analysis results are:
① normal winding
② mild deformation
③ moderate deformation
④ severely deformation

  1. Word electronic document can be automatically generated for saving and printing.

Technical parameters

Scan mode:
1. Linear scanning distribution
Scanning measurement range: (10Hz) – (10MHz) 40000 scanning point, resolution 0.25kHz, 0.5kHz and 1kHz
2. Segment frequency scanning measurement distribution
Frequency scanning measurement range: (0.5kHz) – (1MHz), 2000 scanning points ;
(0.5kHz) – (10kHz)
(10kHz) – (100kHz)
(100kHz) – (500kHz)
(500kHz) – (1000kHz)

thไทย

สอบถามตอนนี้